Fluent Help Center

    Honeywell Glass Break - Tamper

    1. Ensure the panel is disarmed.

    2. Open the sensor by prying the bottom of the casing open with a flat-head screwdriver (or small coin).

    3. Wait 15–20 seconds.

    4. Close the sensor, pressing down on the bottom corners to ensure the cover clicks into place.

    5. Check the panel to see if the error has cleared.

    If the error persists, please call our Account Specialists at 855-238-4826 for further assistance.

    Did this help resolve your question?

    Send feedback

    Can’t find what you’re looking for?

    Our award-winning customer care team is here for you.

    Contact Support
    Fluent's Blog Fluent on Facebook Fluent on Twitter